• When a higher level of immunity is required, such as when animals are constantly in the detection area, consider using DG75
• 11m x 11m (35ft x 35ft) and up to 15m (50ft) for center beams with 88.5° viewing angle
• Extremely high EMI and RFI rejection
• PCB uses only surface mount components
• Solid-state relay
• Patented Auto Pulse Signal Processing
• Automatic Temperature Compensation
• Metal shield maximizes protection from EMI and RFI signals
• Dual element sensor
• Anti-tamper switch
• Can be used with SB469 Swivel-Mount Bracket

Easy to install. Easy to use.

• Average time to install: 5 – 10 minutes
• No PC board removal necessary, easy PC board installation, clip in/out (when desired)
• Optional wall/ceiling mount bracket
• Panel compatibility: EVO, Spectra, Magellan, 3rd party

Faster & More Reliable*

NV5 offers superior* (compared to Paradox PRO476 and NV500) :

• Catch performance
• Even detection, no dead zones within the protected range
• Response to movements – slow and fast
• False alarm immunity Paradox technology, Auto Pulse Signal Processing (APSP) and Dual/ Single Edge Processing enables flexibility in setting detection response time compared to false alarm immunity
• Digital temperature compensation — same catch capability at specified operating temperatures
• RF immunity

Customizable Sensitivity Levels

• 5 levels of sensitivity — choose level according to the needs of the protected area
• Pet resistant
• Adjustable creep zone — mirror add-on provides enhanced creep zone sensitivity and is recommended for best product performance

• Dual optics (2 dual opposed element sensors)
• Provides superior pet immunity using a patented combination of advanced optics and digital processing technologies
• Immune to pets weighing up to 40kg (90lbs)
• Digital Dual Opposed Detection
• 11m (35ft) X 11m (35ft); 90° viewing angle
• Can be used with SB469 Swivel-Mount Bracket

• Dual opposed element sensor
• Digital Detection         
• 7m x 6m (24ft x 20ft) at 2.4m (8ft)     
• 11m x 6m (35ft x 20ft) at 3.7m (12ft) 
• 360° viewing angle    

The detector has two operation modes:
Pet Immunity Mode protection is provided for outdoor windows and sliding doors measuring up to 7.5 x 2m (25 x 7 ft). For indoor applications, pet immunity can be optionally switched off to provide Sharp Mode protection with enhanced detection for indoor windows and sliding doors up to 10 x 2m (33 x 7 ft).

The NV35M uses an extremely narrow beam optic pattern of 0.5m at 5m (1.6 ft at 16 ft), enabling movement in close proximity to the protected door or window without false alarms. It also features integrated creep zone detection.

The NV35M’s robust detection capabilities, outstanding stability and high false alarm rejection rate are a result of the system’s dual optics beam pattern, Paradox Super Pet Immunity and our field-proven Active IR Anti-Mask detection.

Features:

• Pet Immune detection
• Anti-masking – Active IR detection for sprayed liquids and blocking items up to 30 cm
• Integrated creep zone detection
• Dual detectors controlled by Full Authority Digital Electronics Control (FADEC)
• Optical pet discrimination geometry to support Super Pet Immunity
• Dual tamper detection
• Wired, Solid State Relay output

Unprecedented detection accuracy

NVX80 combines unique Paradox technologies to provide superior detection with minimum false alarms.

SeeTrueTM Technology (Patent Pending)

• Identifies camouflaged movements used to breach common PIR and dual tech detectors
• Sensitivity is enhanced while maintaining reliability (even in high temperature environments) – no compromise on false alarm immunity     

Active IR (Patent Pending) & MW (Patented) Anti-Mask Detection

The NVX80 recognizes:

• objects placed in close proximity (within 11.8in. / 30cm)
• objects placed directly on the lens (clear lacquer, clear adhesive tape, aluminum foil etc.)
• degradation of the lens by dirt or dust
• movement within close range of the unit (0.5m – 2m / 1.6ft – 6.5ft) — range is customizable

Dedicated Creep Detector

Integrated Creep Detection unit with dedicated sensor and circuitry provides:

• highly sensitive and reliable protection of a large creep area (0.1m-3m/0.3-9.8ft.)
• enables independent customization of creep sensitivity to secure the area directly below the detector

Pet ImmunityTM(Patented Paradox Technology)

Integrated Creep Detection unit with dedicated sensor and circuitry provides:

• uses size discrimination to filter out objects under 80cm (32in.) high, preventing pets weighing up to 20kg (44lbs.) from triggering the detector and creating a false alarm

Configuration made easy

• Quick installation
• Full color OLED menu display and 4-button interface — intuitive guide to program, customize settings and test the unit.
• Dedicated diagnostics for PIR, MW, anti-mask and SeeTrueTM enable simple, accurate, one time installation. No jumpers, trimmers or complex wiring needed     

NVX80 features:

• A large detection pattern (15m x 15m / 50ft x 50ft)
• Certification: EN 50131 Grade 3 Class IV
• Available in bracket configuration and wall mount
• All-weather cover included
• EN50131 grade 3

• High-resolution and full dynamic range digital signal conversion
• High-speed, advanced algorithm digital signal processing
• Digital EMI / RFI interference rejection
• True Pet Immunity, up to 40kg (90lb)

Advanced Optical Technology:

• 4x dual element sensors arrangement
• High efficiency long focal point (1.77″) lens, providing long-range narrow beams
• 2 pairs of narrow beams per side provide 2x signals per protected area crossing for increased “catch” and false alarm rejection
• Combination optics of mirror reflector and 2nd generation Fresnel “LoDiff” Lens
• Increased white light rejection

Easy Installation and Setup:

• Single or Dual Zone operation modes: two sides can report to a single zone or to two separate zones
• Optical and digital range adjustments
• Bright LED and buzzer indicator for clear adjustment feedback
• No need for PCB removal
• Wall-mount, with built-in level tool
• In-field firmware upgradable via serial port

Features

• IP65 structure
• Lightning and surge protection
• Anti-frost hood cover
• 99% beam blocking stability
• G.C. circuit
• Adjustable beam interruption time

• Support up to 250m Outdoor Distance; 750m Indoor Distance
• Special filter lens and circuit, anti-strong light jamming
• Suitable for outdoor installations
• High-power infrared receiver on the tube, low-power digital frequency processing technology
• Horizontal/vertical optical angle can be easy to adjust

• Max. Contact Rating : 28VDC, 0.5A, 10W
• Gap Distance : 3/4” ~ 1” Tape or mounting screw
• NC type magnetic contact
• Adhesive Tape Included
• Easy Installation

• Wireless range in a typical residential environment:

           – 30m (100ft) with MG6250
           – 70m (230ft) with MG5000 /
              MG5050 / MG5075 / RTX3 /
              K32LX/ K641LX

• Low battery and signal transmission LED
• Available in 433MHz or 868MHz
• Anti-tamper switch
• Dimensions: 12.4cm x 4.5cm x 3.3cm (4.9in x 1.8in x 1.3in)
• Compatible with EVO Series (requires RTX3), Spectra SP Series (requires RX1), and Magellan Series

• Wireless range in a typical residential environment:

           – 20m (65ft) with MG6250
           – 40m (130ft) with MG5000 /
             MG5050 / MG5075 / RTX3

• Built-in strip antenna (printed)
• Available in 433 or 868MHz
• Anti-tamper switch
• Available in 2 colors: white and brown
• Dimensions: 11 x 3.2 x 2.5 cm (4.4 x 1.3 x 1 in.)
• Compatible with EVO Series (requires RTX3), Spectra SP Series (requires RX1), and Magellan Series

• Wireless range in a typical residential environment:

           – 20m (65ft) with MG6250;
           – 40m (130ft) with MG5000,
             MG5050, MG5075 and RTX3

• Available in 433MHz or 868MHz
• Anti-tamper switch
• Dimensions: 4.4cm x 3.0cm x 1.7cm (1.7in x 1.2in x 0.7in)

• Manually-activated battery test function
• Visual indicator (LED) for arming actions and battery testing
• Includes lanyard attachment to facilitate portability; optional wrist strap and belt clip also available
• Includes easily-replaceable CR2032 battery, with a battery life of 3 years
• Available in 2 colors: black and white
• Wireless range in a typical residential environment:
• 30m (100ft) with MG6250 and RX1
• 45m (150ft) with MG5000 / MG5050, MG5075, K32LX and K641LX
• 60m (200ft) with RTX3
• Available in 433 or 868 MHz

• Perform up to 5 different actions
• Wireless range in a typical residential environment:

           – 30m (100ft) with MG6250
             and RX1
            – 45m (150ft) with MG5000
              / MG5050 /MG5075
            – 60m (200ft) with RTX3

• Available in 433MHz or 868MHz

• System Status Memory: The REM2 will keep the last system status received from the control panel in memory. Momentarily press the Info button to display the last system status–even when out of range. Used to confirm the last action you did on the system while away from the system.
• Built-in transceiver (433 MHz or 868 MHz)
• Displays system status using visual (LED) and auditory feedback
• Press the Status button at any time to receive the system status
• Perform up to 6 different actions per remote control
• Compact, water-resistant design with backlight for buttons
• Wireless range in a typical residential environment:

           – 30m (100ft) with MG6250
            – 45m (150ft) with MG5000 /
              MG5050 / MG5075 / RTX3

• 11m x 11m (35ft x 35ft) and up to 15m (50ft) for center beams with 88.5° viewing angle
• Wireless range in a typical residential environment:

          – 35m (115ft) with MG6250;
          – 70m (230ft) with MG5000,
            MG5050, MG5075 and RTX3

• When a higher level of immunity is required, such as when animals are constantly in the detection area, consider using PMD75
• Patented Auto Pulse Signal Processing
• Automatic Temperature Compensation
• Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
• 3-minute energy save mode after two detections within a five-minute period
• Dual tamper mechanism (wall/cover)
• Slide switch to select high or low sensitivity
• EN 300-200 certified
• EN 50131 certified
• Can be used with SB469 Swivel-Mount Bracket

• Immune to animals weighing up to 40kg (90lb)
• Digital Dual Opposed Detection
• Digital Shield algorithm with adjustable sensitivity
• Single or Dual Edge Processing
• 11m x 11m (35ft x 35ft) with 90° viewing angle
• Wireless range in a typical residential environment:

          – 35m (115ft) with MG6250;
          – 70m (230ft) with MG5000,
            MG5050, MG5075 and RTX3

• Patented Auto Pulse Signal Processing
• Automatic Temperature Compensation
• Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
• 3-minute energy save mode after two detections within a five-minute period

• Casing lined with an injected rubber gasket
• UV protected lens
• Dual Optical Filtering System
• Multi-level sensitivity adjustment
• Patented Digital Motion Detection
• Dual optics (2 dual opposed element sensors)
• Digital Dual Opposed Detection
• Alive software (alarm LED continues to display when PIR is in energy save mode without compromising battery life)
• 3-minute energy save mode after two detections within a five-minute period

• LED operation indicator
• Battery operated
• Built-in siren (85dB at 3m)
• Available in 433MHz or 868Mhz (868Mhz RF not yet certified)
• ETL/ETLc certification at 433Mhz only